Hikity 1 Din car radio AV252B 12V Bluetooth 2.1 + EDR Vehicle Electronics In-dash MP3 Audio Player Car Stereo FM Radio with USB/TF Card Portort
AV252B 12V Bluetooth 2.1 + EDR Vehicle Electronics In-dash MP3 Audio Player Car Stereo FM Radio with USB/TF Card Port
1 din Car radio MP3 audio player Bluetooth hands-free stereo FM built-in 2 speakers Supports USB SD AUX audio playback
AOVEISE AV252B Car 1 Din Stereo Radio Audio Player Built-in Bluetooth 2.1 EDR Off Preset 18 Stations FM Time Display Autoradio
AV252B 1 Din DC 12V Car Radio Bluetooth 2.1 + EDR Handsfree In-dash Auto Car MP3 Stereo Player USB TF Card AUX Built-in Speakers
Car Radio Stereo Player Bluetooth Phone AUX-IN MP3 FM/USB/1 Din/remote control 12V Car Audio Auto 2019 Sale New
1.Built-in 2 loudspeakers, Bluetooth and microphone, hands-free call
2.Preset 18 stations ( frequency: 87.5 – 108 MHz )
3.Support audio: MP3 / WMA, etc with USB / TF card Port
4.Support Off time display function
5.Universal 1 Din 12V In-dash Car Radio Audio Player Built-in 2 Speaker Stereo FM Support Bluetooth with Aux/USB / TF Card Port Smart AV252B
*Built-in Bluetooth 2.1 + EDR and microphone, hands-free call
*Built-in 2 loudspeakers
*Supports advanced audio distribution profile
*Off time display function
*Digital high-quality FM stereo radio
* Preset 18 stations ( frequency: 87.5 – 108 MHz )
*Support USB / TF card reader ( TF card is not included )
*Support audio: MP3 / WMA, etc.
* Support breakpoints and ID3 play
* Rotary volume control
*Multiple EQ scene selection: Jazz, rock, pop,classical, etc.
*L / R RCA audio output jacks, can connect with subwoofer
*Impedance: 4ohm / 8ohm
*Frequency respond: 20 – 20000Hz
*Sensitivity: Less than 12dB
*Max output power: 5W x 2
*Dimensions: 180 x 42 x 50mm
*Panel size: 188 x 15 x 58mm
*Package weight: 0.482 kg
*Package Size(L x W x H): 21.00 x 15.00 x 8.00 cm / 8.27 x 5.91 x 3.15 inches
*1 x AV252B 12V Bluetooth Vehicle MP3 Audio Player
*2 x Installation Accessory
*1 X User Manual
FAQ:(Car Radio )
Q1.Why the car radio can’t turn on ?
1>Please check the Voltage of car radio :DC 12V
2>When you test this car radio,you can combine the red and yellow wires and connect them to the positive side of the power supply.Black line to negative power supply.
3>Replace the same type of insurance to test the car radio.
Note:Please msut use our power cables to connect our car radio,it is not possible to insert the original car plug directly into our machine.
Q2.Why the car radio will show “No Signal” when we reversing?
>Please check if the camera’s line is properly connected to the car radio.
>Note:The video port of rear camera must insert the “CAMIN” port of car radio.
Q3.Why does the camera display “!” and “Can’t watch video while driving” when I use USB to watch videos?
> Please turn off the “Video Warning” function in the settings,then will be OK.
Q4.Why the car radio will show time after we turn off this?
>That time clock is a function for the car radio ,that can’t be removed.In fact that car radio had been turn off,it save the time are more convenience for people to see,
>If you didn’t need this,you need to unplug the power positive and negative.
Q5.Why haven’t sound in car radio when playing the music?
>1.When you are not using our original audio cable, please check if your audio cable is suitable for our camera.
>2.Please check if there is any collision between the lines.
>If the line is connected, there will be no sound when the speaker cable touches the speaker cable.There is also no sound when the power cord touches the speaker cable.
>If the problem still here,please use a single speaker to connect a group of audio cables to test the car radio. The four speaker cables are connected separately to see if there is any sound.
Q6.Why can’t search FM?
>1. No radio antenna inserted.
>2. Please check if the radio antenna is plugged in. Please insert more antennas several times to make it well contacted.
>3.The signal of your location is not good. Please go to a better place to test again.
>4.The radio antenna on the car is broken/no effect; please replace the radio antenna and test again;
Q7.Why can’t connect the Bluetooth of car radio?
>1.Open the phone settings interface, open the Bluetooth in the Bluetooth function, search for Bluetooth devices, find the player’s Bluetooth model to be paired; if you need a pairing code, enter 0000; if not, try 1234 or 123456.
>2.Please try to use another mobile phone to test this function.All methods are correct and still cannot use Bluetooth, Please unplug the plug on the back of the player and plug it in after 3 minutes.